Skip to Content

How it goes together

Three steps, no special tools. Clear a bench or set up two trestles, and follow the guide included in the carton. A first-time assembler takes about 30 minutes using only the mallet supplied.

Flat-pack coffin boards, dowels and a mallet laid out on a floor

1. Open and check

Open the carton and check the parts against the parts checklist inside.

A hand holding a mallet above a wooden dowel being driven into a board joint

2. Assemble the parts

Follow the instructions guide. Connect the components with dowels and the mallet supplied.

Solid timber coffin seen from above on grass, with white roses on the lid

3. Furnish the coffin

Furnish the coffin by laying down the absorbent pad, securing the liner and adding a pillow.

Watch it go together

Storage and handling

  • Stores flat in a single compact carton, saving floor space in your premises
  • Keep the carton dry. A care and storage note is available on request.
  • About 50 kg (estimate, confirmed when the sample is complete). A two-person lift.
  • The assembly guide and parts checklist come in the carton
  • A PDF assembly guide will be available under Guides and downloads

Questions about assembly?

Ask us for the assembly guide and the specification sheet.

Request trade pricing